Vol 19 No 1 (2013): Supplement
Published: 2014-01-09
Articles
Behaviour of composite plate girders with partial interaction
Abstract 477 | PDF Downloads 422 | DOI https://doi.org/10.3846/13923730.2013.801898
Page S1-S13
Effects of geogrid reinforcement in low volume flexible pavement
Abstract 603 | PDF Downloads 810 | DOI https://doi.org/10.3846/13923730.2013.793606
Page S14-S22
Combined 3D building surveying techniques – terrestrial laser scanning (TLS) and total station surveying for BIM data management purposes
Abstract 1924 | PDF Downloads 2356 | DOI https://doi.org/10.3846/13923730.2013.795187
Page S23-S32
Incorporation of rubber-steel bearing isolation in multi-storey muilding
Abstract 627 | PDF Downloads 554 | DOI https://doi.org/10.3846/13923730.2013.801904
Page S33-S49
Positive interaction of industrial and recycled steel fibres in fibre reinforced concrete
Abstract 887 | PDF Downloads 656 | DOI https://doi.org/10.3846/13923730.2013.802710
Page S50-S60
The effects of using recycled concrete on fatigue behavior of hot mix asphalt
Abstract 637 | PDF Downloads 575 | DOI https://doi.org/10.3846/13923730.2013.801892
Page S61-S68
Structural behaviour of fully coupled spar–mooring system under extreme wave loading
Abstract 505 | PDF Downloads 562 | DOI https://doi.org/10.3846/13923730.2013.801899
Page S69-S77
A new design equation for prediction of ultimate bearing capacity of shallow foundation on granular soils
Abstract 627 | PDF Downloads 1183 | DOI https://doi.org/10.3846/13923730.2013.801902
Page S78-S90
A comprehensive framework for evaluating key project requirements
Abstract 677 | PDF Downloads 593 | DOI https://doi.org/10.3846/13923730.2013.801903
Page S91-S105
Semi-ideal Bidding via a fuzzy TOPSIS project evaluation framework in risky environments
Abstract 592 | PDF Downloads 451 | DOI https://doi.org/10.3846/13923730.2013.801884
Page S106-S115
Identification of the most important factors in the compaction process
Abstract 453 | PDF Downloads 363 | DOI https://doi.org/10.3846/13923730.2013.801893
Page S116-S124
The effect of cement modification on the rheological properties of cement paste
Abstract 473 | PDF Downloads 540 | DOI https://doi.org/10.3846/13923730.2013.851111
Page S125-S130
Statistical evaluation of pre-selection criteria for industrialized building system (IBS)
Abstract 728 | PDF Downloads 640 | DOI https://doi.org/10.3846/13923730.2013.801921
Page S131-S140
Reinforced and prestressed concrete hollow beams under torsion
Abstract 540 | PDF Downloads 652 | DOI https://doi.org/10.3846/13923730.2013.801895
Page S141-S152
Comparison of surface macrotexture measurement methods
Abstract 590 | PDF Downloads 1115 | DOI https://doi.org/10.3846/13923730.2013.802732
Page S153-S160
Lifecycle energy consumption prediction of residential buildings by incorporating longitudinal uncertainties
Abstract 569 | PDF Downloads 378 | DOI https://doi.org/10.3846/13923730.2013.802744
Page S161-S171
Adoption processes for EDM, EDI and BIM technologies in the construction industry
Abstract 1023 | PDF Downloads 886 | DOI https://doi.org/10.3846/13923730.2013.801888
Page S172-S187
Highway infrastructure health monitoring using micro-electromechanical sensors and systems (MEMS)
Abstract 893 | PDF Downloads 662 | DOI https://doi.org/10.3846/13923730.2013.801894
Page S188-S201
Predicting project success in construction using an evolutionary Gaussian process inference model
Abstract 526 | PDF Downloads 466 | DOI https://doi.org/10.3846/13923730.2013.801919
Page S202-S211
A method for linking safety factor to the target probability of failure in fire safety engineering
Abstract 680 | PDF Downloads 765 | DOI https://doi.org/10.3846/13923730.2013.802718
Page S212-S221