In order to recommend jet fuel for powering diesel engines the quality parameters of the following fuels were determined: diesel fuel (NATO code F-54) according to standard LST EN 590: 2014, jet fuel (NATO code F-35 and F-34) according to standard ASTM D 1655 and U.S.MIL-DTL-83133E, and jet fuel was treated with additives at the Centre of Quality research laboratory located at “ORLEN Lietuva” Ltd. Basic quality parameters of alternative jet fuels were analysed and compared with the reference parameters of diesel fuel. It was determined that the use of additives in jet fuel improves its parameters up to a level which satisfies the corresponding characteristics of normal diesel fuel: cetane number, lubricating properties, net heating value per unit of mass, sulphur content and, therefore, can be recommended for the use in land-based transport means and power generators.
Vilutienė, V., Labeckas, G., & Slavinskas, S. (2015). The influence of the cetane number and lubricity improving additives on the quality parameters of aviation-turbine fuel. Aviation, 19(2), 72-77. https://doi.org/10.3846/16487788.2015.1057994
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
