Share:


Implementation of close range photogrammetry using modern non-metric digital cameras for architectural documentation

    Mariem A. Elhalawani   Affiliation
    ; Zaki M. Zeidan Affiliation
    ; Ashraf A. A. Beshr   Affiliation

Abstract

The development of applied geodetic techniques for mapping and documentation of historical structures, buildings and sites is an important and vital purpose for contribution of any recording of cultural heritage for any country such as Egypt. This is done to preserve and restore any valuable architectural or other cultural monument, as a support to architectural, archaeological and other art-historical research throughout the ages. The purpose of this paper is to use close range photogrammetry technique (CRP) to reconstruct 3D model of architectural and historical mosque facade and comparing the accuracy of using digital commercial non-metric cameras with different resolutions and metric camera with flatbed scanner and photogrammetric scanner for architectural building documentation. El-Nasr Mosque façade in Mansoura city, Egypt was chosen as a case study in this paper. At first, twenty five points were selected at mosque façade at different elevations and distributed at different façade surfaces and observed using total station. Some of these points were selected as control points and the others were selected as check points to validate the results. Effect of control point’s number on image processing and analysis is also studied. Three cameras positions were selected for imaging to get the full details of mosque façade. Close range Digital Workstation (CDW) program was used for processing and analysis of multiple images. The results are indicated that close range photogrammetry using metric camera with photogrammetry scanner instead of flatbed scanner in technique is accurate enough to be beneficial in 3D architectural building documentation. Digital cameras with CRP technique give up different accuracy that depends mainly on the resolution of cameras and camera specifications.

Keyword : 2D facade, CRP, metric camera, digital camera, Close range Digital Workstation (CDW) program

How to Cite
Elhalawani, M. A., Zeidan, Z. M., & Beshr, A. A. A. (2021). Implementation of close range photogrammetry using modern non-metric digital cameras for architectural documentation. Geodesy and Cartography, 47(1), 45-53. https://doi.org/10.3846/gac.2021.11269
Published in Issue
Apr 26, 2021
Abstract Views
514
PDF Downloads
477
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Abed, F. M., Mohammed, M. U., & Kadhim, S. J. (2017). Architectural and cultural heritage conservation using low-cost cameras. Applied Research Journal, 3, 376–384.

Cardenal, J., Mata, E., Castro, P., Delgado, J., Hernandez, M. A., Perez, J. L., Ramos, M., & Torres, M. (2004). Evaluation of a digital non metric camera (Canon D30) for the photogrammetric recording of historical buildings. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 34(Part XXX).

Elsharkawy, A. (2017). Accuracy of modern three dimensional data acquisition system for the restoration of historical buildings [Doctoral thesis]. Faculty of Engineering, Port Said University.

Gayde, J. C., Humbertclaude, C., & Lasseur, C. (1997). Prospects of close range digital photogrammetry in large physics installations. In Proceedings of the 5th International Workshop on Accelerator Alignment (pp. 1–12), Chicago, USA.

Khalaf, A., Ataiwe, T., Mohammed, I., & Kareem, A. (2018). 3D Digital modeling for archeology using close range photogrammetry. MATEC Web of Conferences, 162, 03027. https://doi.org/10.1051/matecconf/201816203027

Luhmann, T. (2010). Close range photogrammetry for industrial applications. ISPRS Journal of Photogrammetry and Remote Sensing, 65(6), 558–569. https://doi.org/10.1016/j.isprsjprs.2010.06.003

Markiewicz, J., Łapiński, S., Pilarska, M., Bieńkowski, R., & Kaliszewska, A. (2018). Investigation into the use of action cameras in the documentation of architectural details-the case study of a baroque chamber. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 42(2), 667–674. https://doi.org/10.5194/isprs-archives-XLII-2-667-2018

Rollei. (1993). Rollei-flex6008 user’s manual. Rollei Foto-Technic GmbH & Co KG.

Sementsov, A. V., Nikitin, V. N., & Chermoshentsev, A. Yu. (2015, March 23–24). 3D object modeling from images taken by non-metric digital cameras: problems and their solutions. In 2nd International Workshop on “Integration of Point- and Area-Wise Geodetic Monitoring for Structures and Natural Objects” (pp. 13–15), Stuttgart, Germany.

Suveg, I., & Vosselman, G. (2000). 3D reconstruction of building models. International Archives of Photogrammetry and Remote Sensing, 33, 538–545.