The article deals with the principle of using gyrotheodolite in connection and orientation measurements. It describes orientation measurements with gyrotheodolite, provides basic information about the device and explains how it works. The first part describes gyrotheodolite and methods of determining astronomical true north. The workflow for measurement and subsequent data processing is described below. In the second part, two orientation measurements are described and processed. Finally, the accuracy achieved and the possibility to use the device for activities other than mine measurement are assessed.
Bezdíček, V., Dandoš, R., Konečný, M., Kotrbanec, J., Král, T., & Wlochová, A. (2018). Orientation measurement with gyrotheodolite. Geodesy and Cartography, 44(3), 100-105. https://doi.org/10.3846/gac.2018.2683
Bezdíček, V. (2016). Připojovací a usměrňovací měření na dole ČSM. Technická univerzita Ostrava. Retrieved from http://hdl.handle.net/10084/115635
Černota, P., & Staňková, H. (2014). New methods of conducting connecting surveys and orientation measurements in mining works (1st. ed.). Košice: Technická univerzita v Košiciach.
Decree No. 435/1992 Coll. (n.d.). Of the Czech mining authority on mining measuring documents in mining activities and some activities carried out using mining methods, as amended. Retrieved from https://www.zakonyprolidi.cz/cs/1992-435
Neset, K. (1967). Důlní měřictví. II, Měření výškové, připojovací a usměrňovací, měření vytyčovací. Praha: SNTL – Nakladatel-ství technické literatury.
Novák, Z., & Hánek, P. (1995). Geodézie v podzemních pros-torách. Praha: České vysoké učení technické.
Authors who publish with this journal agree to the following terms
that this article contains no violation of any existing copyright or other third party right or any material of a libelous, confidential, or otherwise unlawful nature, and that I will indemnify and keep indemnified the Editor and THE PUBLISHER against all claims and expenses (including legal costs and expenses) arising from any breach of this warranty and the other warranties on my behalf in this agreement;
that I have obtained permission for and acknowledged the source of any illustrations, diagrams or other material included in the article of which I am not the copyright owner.
on behalf of any co-authors, I agree to this work being published in Geodesy and Cartography as Open Access, and licenced under a Creative Commons Licence, 4.0 https://creativecommons.org/licenses/by/4.0/legalcode. This licence allows for the fullest distribution and re-use of the work for the benefit of scholarly information.
For authors that are not copyright owners in the work (for example government employees), please contact VILNIUS TECH to make alternative agreements.
